• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they don't get rusty or decay.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and even be fatal. It is important to take the time to make sure that you're doing all you can to keep your windows in good condition.

Single-pane windows are fairly simple to replace, and they typically fit into frames that were previously in use very easily. If you have double-paned windows which are joined by internal beading, it will be more difficult to remove and replace the old panes. In this situation, it is necessary to buy plastic spacers to make sure that the new pane fits into the window frame.

If you're planning to try to remove the glass panes yourself it is crucial to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor, where they could be trampled under.

Once the glass is removed from the window, it's best to cover the gap with clear packaging tape or duct tape to block water and drafts from entering the home until a professional is able to come out and fix the window. It also acts as a barrier, preventing any intruders from getting access to your home. If the gap between the window and the door is large, you might want to use a security screen that also includes windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time they are susceptible to a range of problems including sagging. A window that is sagging can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from becoming worse.

Repositioning the hinges could aid in fixing a window that is sagging. First, you'll need to unblock the windows to access the frame. You can then unscrew both the top and bottom hinges using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you have moved your hinges. If you're satisfied with the size of the window, tighten the screws to keep them in the right position.

If you are unable to move the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, causing them to lose their tightness. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are watertight and secure from draughts.

uPVC handles can also loosen up. This is often caused by screws that have become undone over time, but it could be caused by the handle mechanism wearing out. It's relatively simple to fix a loose uPVC hand. The first step is to close the window and then perform an initial test to ensure that it fits. The corners of the sash need to be aligned with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and turn the mechanism back into position.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains it's crucial to take action. Windows that leak water do not only lead to the degrading of the structure of your home but also undermine your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be completed by any DIY expert. Depending on the severity of the issue is, the old caulking may have to be removed. It is essential to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and could reduce the efficiency of your energy.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious cases, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double-glazed glass it is more likely the issue is more with the seal rather than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your upvc window repair windows are brittle to open, or loose and blow open with a breeze, it may be hinges at fault. They can be easily replaced by any competent DIYer and can be completed in just a few minutes.

Like any mechanical component hinges will be damaged over time. It is an easy process but it can be easier when you have a person to help you hold the frame up.

Check that the uPVC hinges open and close in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused either due to opening the window in the wrong way or due to a poor installation at the factory. Sending us a photo through our website can often solve the issue. We are more than happy to give assistance.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant on the hinges is a great way to do this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window repairs to open and close more easily. It can also reduce the risk of a window sticking and help prevent corrosion. It is recommended to do this once a year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges may also become misaligned due to wear, which can cause an opening where the sash meets frame. They can be repaired by giving them good clean, but in the event that they are beyond repair it may be necessary to have them re-aligned or replaced. Secondly the interlock, this is on the hinge side of the window and can be misaligned. Again, it is feasible to give them a good clean, but in some cases it might be necessary to have them replaced.

The seals may wear out or be damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping can help stop draughts. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures, and also lessen draughts.

Another, and most effective ways to cut down on drafts is to use an draught excluder. These are typically fabric tubes that are filled with some sort of filler and can be positioned on the windowsill on top. They will help block out cold air and keep your home warm and cosy!

With a little maintenance and repairs your windows made of Upvc Window Repair will provide an excellent level of security and insulation for your home. It is important to remember that all windows eventually wear out and it may be cheaper to replace them instead of fixing them. So, if you're having issues with your upvc windows, it is always best to seek professional assistance as soon as possible.