• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

Over time the handles on your doors will wear out and require replacement. It is important to match the dimensions of the old handles when replacing them.

The top screw position, the lever and the keyhole sizes are the three measurements you have to determine. Use the size guide to aid you.

Inline Lever/Lever

A lever handle or lever is a contemporary door handle designed to work with new or replacement doors. This type of door handle is available in a wide range of designs and finishes. This handle is available from several manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The uPVC/Composite door handles are made of sturdy materials and are suitable for multi point lock doors that require a heavy duty design. The handles are inline and they use the same spindle and screws to fix them. They can be easily installed on a new or existing uPVC/Composite doors.

The design of the sprung lever allows the handle to be placed and angled to provide a comfortable grip and is suitable for all users. The handle has been tested to 200,000 cycles. This helps ensure that the finish is of high quality and performance over time. The sprung lever can be reduced to accommodate more locks. This is especially useful in doors with smaller door frames where the cylinder is located further back. A shortened lever is also an ideal choice for doors that have latches that can be operated by a thumb turn located on the inside.

Lever Pad

A Lever Pad upvc door handle operates differently than lever handles found on most doors. These handles are operated by one spindle, or two spindles inline or offset. They are usually used on UPVC double-glazed doors and are available in a variety of variations and styles.

The window handles for upvc have been tested to at least 200,000 cycles and are available in several finishes, including White and Silver, as well as Chrome & Gold. The finish meets BS EN 1670:2007 Grade 5 and is also resistant to corrosion, giving the handle a high degree of durability and performance for its intended use.

All of the UPVC lever pad designs are supplied with a spindle and screws, allowing them to be fitted on any new or existing uPVC door. The backplate fixing centers of 211mm permit a bigger handle, which is often a benefit when replacing a faulty or worn multi-point door lock mechanism. The levers for these handles have springs, which can solve the issue of handles for doors that slide out of horizontal position when they are not being used.

When selecting the replacement UPVC handle and spindle, it is important to match the dimensions of the PZ on the multipoint lock as well as the uPVC door. This measurement is also called 'handle centres' or cylinder centres'. It is important to match the correct handles.

After you have determined the correct PZ size, you will need to ensure that the push and lever pads are designed to fit the American with Disabilities Act compliant handles you require for your door. They are usually rectangular or round in design with an internal lever and external push pad.

The majority of the UPVC Lever Pads we sell are sprung. This means they can be reverted to a horizontal state when they are not in use, rather than hanging and possibly being stuck in the frame. This stops draughts and cold air from getting into a house. Also, the majority of the UPVC lever pad handles are hand-operated that allows you to put them on either side of the door.

Euro Cylinder

Cylinder locks are found on uPVC and other kinds of doors. Cylinder locks are operated by using a key that unlocks the cylinder case. This reveals pins that can be aligned with those in the lock, and permit them to rotate the revolving camera, thereby opening the door. Euro cylinders are available with up to six pins. Internal and external doors require different levels of security.

Choosing the right cylinder is crucial; it depends on the way your doors and handles are used. External doors, for instance, should be fitted with cylinders that are more secure while internal doors can be secured with the standard cylinder. In addition, some cylinders are available with extra features that can improve security further, such as anti-drill and anti-bump characteristics.

A euro cylinder should be properly measured to ensure that it is the correct size for your door. The cylinder must be measured from the screw hole in the center to the ends of the cylinder. This includes the thumb turn, in the event that one is present. If you are unable to measure using the lock in a fixed position, you can remove it. It is important to not have a cylinder that extends beyond the handle or escutcheon. This can make it vulnerable to lock snapping attacks.

Most newer cylinders have been constructed with bump and anti-drill features included in their design. They are designed to decrease attacks by forcing cylinders to turn in a different direction. This helps deflect the attack and keep your doors safe.

Certain cylinders are constructed to resist snapping. This is a common occurrence on cylinders. A special tool is used to break the break line of the lock, and then the front of the cylinder is snapped off. This is a quicker and easier way to gain access than a multipoint locking system. It also leaves less evidence of the burglary which can hinder insurance claims.

Spring Cassette

This spring cassette is found in the base plate of the door handle. It provides a sprung solution to return the multipoint lock handles to their original position after using. The handles had no spring and would droop when the locking mechanism was removed. This component is the most effective way to fix this problem. It also prevents your victorian door handle from becoming stuck in either the closed or open position as they are difficult to close manually.

These spring cassettes have been specifically designed to be used with sprung multipoint locks but they won't work with non-sprung multipoint handles. You will require a bespoke hole cut into your backplate in order for them to fit (please check the image for a technical diagram). They are a replacement double glazing handles for existing broken or missing cassettes in the backplates of door handles of numerous kinds of uPVC doors. They are supplied in a single unit. They feature a square cut out that is able to accommodate an 8mm shaft.

These spring cassettes are a great value solution to the problem of sagging door handles. They are simple to install and will extend the life span of your uPVC doors. For more information about our selection of uPVC accessories and spares, please feel free to get in touch with our team. We are here to help and happy to provide professional advice.