• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

how to replace lost subaru key to Programming a Subaru Key Fob at Home

Depending on how to replace subaru key fob old your Subaru is, you may need to have the key fob programmed by an automotive or dealer locksmith. This is typically accomplished through the connection of a programming machine to the computer in your car.

To program your Subaru car, you must open the door to the driver's side using the door button, and then close it. You will hear a chime on the instrument panel and the dome lights will blink.

Step 1: Locate your transmitter circuit board

There are many ways to program your key fob. First, you must know which kind of key fob you own. This can be accomplished by looking at the shape of the key fob, or by listening to the chime in your car.

Once you have this information, you can begin the process of programming your key fob at home. You will need a flathead and a metal key for this. Open the key fob by twisting. Push the key's metal part into the case and then release the battery by pushing the tabs that hold it in place. Replace the battery and then put the case back together.

Step 2: Remove the key fob case

It is a good idea to change the battery of key fobs if they're not functioning. In some cases, the buttons on the key fob could be damaged. If you are able to see that the metal contacts on the button have been loosened, you can try soldering them back in place to make them work again.

Before you begin the process, ensure that the doors of your car are shut and the ignition is turned off. Close the driver's side doors and press the door button 10 times in rapid succession. You'll then hear the instrument panel chime and the dome light will flash. This indicates you're now ready to proceed.

Step 3: Insert the fob for the key into the ignition

Many articles on the internet will show you how to get a new subaru key to program your new or replacement Subaru keyfob at home. But, the majority of them don't offer very specific instructions. A professional auto dealer or locksmith in Fort Bliss is the best option for reprogramming an electronic car key.

Sit in the driver's seat of your Subaru with the engine turned off and all doors shut. Open the door button control and use it to unlock all doors. Open and close the driver's doors two more times. Then, remove the key from the ignition switch (don't turn it) 10 times within 40 seconds. The system will chirp to confirm that the settings have been altered.

Step 4 4. Turn on the ignition.

It is crucial to understand that this method of programming a key fob only works if you already have a working key. If you do not then a dealer or auto locksmith will be required to program a brand new key for your Subaru in Fort Bliss.

Once your key has been programmed and you are able to start your car in about five seconds. To begin, ensure that all doors are shut and the engine is turned off. Sit in the driver's seat and unlock the doors by pressing the button for the door. Place the key into the ignition and turn it on to the off position (the electrical systems will come on, but the engine will remain off) then turn it back to the off position ten times in quick succession.

Step 5: Unlock the Driver's Door

spare subaru key offers a variety of high-end cars with key fobs which lock and unlock doors, turn on the engine, and even defrost windows. However, there are times when these devices stop working properly.

Call a locksmith dealer to fix the issue. This will fix the issue and ensure your vehicle is safe.

To do this, you must open the driver's door, then close it. Put the key in the ignition and then turn it back to position 1. Then, return it to the off position. Do this as quickly as you can for ten times. After the tenth time you should hear a sound.

Step 6: Press the Lock/Unlock Button on the Driver's Door

The process to replace the battery on a Subaru remote key fob is easy. First, open the exterior fob casing. Use a flathead to pry the casing open inside and take out the old batteries.

After removing the old battery, put in the new one and close the case. Then, get in the driver's seat and unlock all the doors with the door button control. Then, put the key in the ignition and turn it so that the electrical systems are on, but the engine is off. Repeat this 10 times in a line until you hear a sound on the instrument panel. This puts the system into programming mode.

Step 7: Press on the Passenger Door Lock/Unlock button.

The annoying chirp which can be heard when locking or unlocking a Subaru Key Fob from outside of the vehicle can be a distraction for some owners. In some cases, the chirp can be turned off by opening and closing the doors as well as a double-click of the lock button on the key fob.

Switch off the ignition and shut all the doors as well as the lid for the fuel-filler. For 10 seconds pressing and holding the lock button on the key fob. The instrument panel emits a sound when this is done. The chirp signalizes that the lid of the fuel filler and door are locked. The setting can be changed to make the doors and lids for the fuel-filler are locked automatically, without pressing the request switch.

Step 8: Enter your 8-digit Transmitter Number

Keep the first 8 digits of the code in your head. Now, get in your driver's seat. Close all the doors and turn the ignition to the first position (towards on). After ten turns your instrument panel will sound once.

The transmitter circuit board is located inside the key fob's case. There are usually one or two sets of numbers (8-digits) on the circuit board. Note the sequence that starts with the first number, and follow the instructions in this guide to register the code on the system of your vehicle. For older models, this procedure may require a visit to the dealer.