• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Electric fireplace wall hanging (http://www.0471tc.Com/) Ideas

The wall-mount electric fireplaces are available to go right out of the box. They're an excellent way to add the ambience without venting or renovation.

They're usually heavy and require careful installation. Follow these steps to hang your new electric fireplace properly.

1. Connect the Brackets

A wall-mounted or recessed electric fireplace instantly improves the look of any room. This is a great option for those who don't have a fireplace or live in apartments.

First, decide where you'll put your new electric fire. It's crucial to select a location that won't be vulnerable to moisture and is at least just a few inches from drapes, furniture, and other areas with a lot of traffic. Mark the wall hanging electric fireplace with layout marks that indicate the top and bottom plates for the fireplace frame.

Make use of a drill or another tool to drill exploratory holes into the wall. Examine for studs with a stud-detector and mark the drywall with the location of the fireplace mounting brackets. Then patch and paint the wall or create a wall to prepare it for the fireplace installation.

Depending on the fireplace mounted to the wall you select, you might require the installation of both the firebox and screen in one unit, or separate them using a wall bracket. If you're not sure about your capability to complete this task you can hire a general contractor or a skilled carpenter.

You will find templates included with the majority of electric fireplaces. However it is recommended to keep a pencil level handy and a pencil to mark out the exact spot where the wall brackets will be installed. Make use of the template to ensure that the power cable of the fireplace is able to connect to an outlet nearby to connect it.

When the studs and fireplace frame are in place, you can install a drywall that is as smooth and flush as possible to give a neat appearance. Install trim along the bottom edge and then sand, paint and finish the frame.

Most wall-mounted electric fires have slots or hooks on the back of the unit which you insert into slots or hooks on the mounting brackets. Make sure you align the slots or hooks before connecting the fire brackets. Once the fire is placed you can then add additional elements, such as crystal embers or driftwood log pieces or decorative rocks.

2. Check the Bottom Bracket

The space above a fireplace mantel, chimney breast, or mantel is prime real estate to hang artwork. However, there's a fine line between an artistic arrangement & one that detracts from the overall look of the fireplace's design.

A general rule is that a photo should be 80percent of the width of the mantel or fireplace it sits over. This will help it remain proportionate and appear pleasing on the wall. This rule of thumb could be affected by other ornaments and decorative items on the mantel.

If you plan to hang a photograph over your electric fire the frame should be made of glass or a material that can withstand high temperatures. If you are unsure, you can test the frame with a heat sensitive cloth to see if it is suitable for this type of installation.

One of the most common concerns when displaying pictures above the fireplace is the possibility of damage to artwork by smoke or other heat sources. This is not an issue with a wood- or gas-powered fireplace. However, if you plan to install an electric wall fireplace it is important to read the instructions provided by the manufacturer.

The majority of electrical fires come with an installation bracket that can be attached to the wall using hanging screws or wall-mounted fixing systems. If the latter, it is recommended that you make exploratory holes in a discrete part of the wall before you begin to install your electric wall fires fire. Afterwards, you can use a pipe & cable finder to check that there are no pipes or cables within the vicinity of the location you've chosen to mount it.

If there are there are, you may decide to put your fire over the electrical socket or relocate it to a new location. If you move it to a new location it is important to ensure that the power cable can reach from the fire to the electrical outlet - this is crucial for older homes or houses with solid walls. If you don't do this, your electric on wall fireplace fireplace won't work effectively. Certain models have a template included that indicates where to drill the holes for this purpose Some require a spirit level & pencil to mark the correct locations on your wall.

3. Connect the Power Cord

You may need to move your plug socket behind the unit if you have installed a fireplace with a recess. This can create a sleeker look. Test the fireplace first to make sure it is operating correctly.

Another popular method to mount an electric fireplace is to frame the space and then build it into the wall. This gives a finished traditional look and also allows you to add mantels. The owner's manual for your specific model will have details on framing, securing your fireplace, and wiring.

The location of your new electric fireplace on the wall using the help of a pencil or marker. Use a carpenter's level to ensure that the area of installation is flat and level. You can also employ a stud finder to mark the location of studs so that you can be certain that you're drilling into an area that is safe.

Use your electric drill after you have identified the location of installation to drill holes for bracket screws or hanging screws. Follow the steps in your owner's guide for this step. This is particularly important if you're putting the fireplace into the drywall. If you're not sure of how to do this you can always consult an expert to do the installation for you.

A cable organizer kit can be used to hide power cords. These kits usually include sleeves, clips or boxes to bundle cables. You can use fish tape or wire snakes to guide the cables. If you don't want to cut into your drywall, you can install an electric bridge kit to make cleaner and safer connections.

You can also disguise the wires by painting them with paintable covers or by tacking them to the wall and skirting boards. Keep the cover or tacks from sources of heat. This will shield the cord from damage and also prevent accidental contact.

4. Connect the adapter

A wall-mounted electric fireplace is a great option for home renovations or for those who do not have the space or money to put in a gas fireplace. They are easy to install and come ready to use straight from the box. They are a wonderful alternative for those who are looking for a stylish modern electric wall mounted fire touch or the warmth the fire can bring. They are designed to be hung like artwork on any wall. They can be recessed or not recessed at all, and are fully electric and have fan-powered heating.

Before you start the actual installation process it's recommended to make a list of all the tools and equipment you'll need. You can find the complete instructions on how to install an electric fire in the user manual. Certain models require brackets to be screwed directly into the wall while others might have a mounting plat that slides into slots or hooks on the brackets. It is important to remove all combustible material from the area you will be installing a recessed unit. As a rule of thumb the materials should be kept 3 feet away from the front side of the fireplace and 1.5 feet away from its sides.

After you've checked all the components, you'll need to connect your electric fireplace and ensure that it is working correctly. This is an essential step, as it will ensure that the flame effect screen and heater function as intended. This will also give you an idea of how the finished product will look in its final configuration.

Cover the cord after you are confident that it's working correctly. This will keep the finished product neat. It is possible to do this by using wire covers that are paintable or install an outlet that will allow you to place the cord behind the unit. This will provide a seamless finish to your fireplace.