• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace the Replacement Key Battery For the Saab 9-3

saab 9-3 key fob replacement owners must follow a set of steps that are unique to add a second ignition key. It requires dealer support using an electronic handheld computer called Tech-2. Then the transponder must be replaced and a key are required to be purchased.

Rotate your keys to stop one from deteriorating faster than another. This will help to keep your keys in perfect condition.

Replacement Case

Unlike the classic Saab keys of the past keys, the new key fobs contain electronics which makes it difficult to make a copy. This has made stealing car keys considerably more difficult than it was years ago. However, it also has made the replacement of lost keys an incredibly costly endeavor.

Saab 9-3 owners should have two keys that work. It costs a fortune to replace a lost key as it requires replacing the CIM module, as well as changing the locking cylinders. Dealers charge between $100-$200 for this.

There are ways to avoid these costs. Some parts dealers will look up the code from an old key (usually the same one that opens the doors and switches the ignition) and cut a new key blade from metal for just a fraction of dealer cost. The key, however, must be the same as the original one to function properly within your car.

You can also change the case yourself by following these steps. You'll need a flathead screwdriver as well as some patience. With the screwdriver, break away the plastic and take out the emergency key. Once you have the case open, take the electronics out and place them into the new case. Make sure you put the correct badge and key back into the case as well.

Replacement Battery

The Saab 9-3 replacement battery is an inexpensive part that can be quickly and easily replaced. The YouTube video of Cyclone Cyd demonstrates the procedure for replacing the remote fob battery with just four simple steps. This tutorial can be used for any modern saab key fob, however, the procedure may differ slightly.

The first step is to locate the button that will release the backup key on the fob. It is usually located next to the saab replacement key logo on the back of the fob. Then you will need the flathead screwdriver to insert into the small hole inside this button. This should be sufficient to open the fob case in order to change the battery.

After the new battery CR1632 is in place, you can reassemble the remote key fob and program it to your car. The whole process should take more than an hour at most. It is a simple procedure that doesn't require any special equipment.

If you lose your key, the procedure will be a bit more involved however, it can be accomplished. The dealer has to verify the VIN of the car, and then order a new key blade and TWICE module that has the correct unique code. The dealer will then need to program the key using MDI, a new software tool.

Replacement Key Fob

The key fob is the device that locks and unlocks your car, it has a battery inside. The batteries are able to last for, and they will eventually fail. This is a frequent issue in all vehicles. The good thing is that you can replace the battery on most key fobs, without having to replace the entire case. Amazon sells fobs for replacement that already have all the electronic components installed. It is easy to pop the case open and replace the batteries. You will need to remove the emergency key before you can replace the batteries. To do this, place the screwdriver of a small flat head into the slot in the middle. Work the screwdriver around the case, and it should split open, making it easy to take it out.

If you're about to replace your keys, ensure you have a spare since this will cut down the total cost by a significant amount. If you have an additional key, you can ask the dealer to cut it in half and program it to your car. This is much cheaper than purchasing a new fob.

If you do not have a spare key, it is possible to add an additional key to your car, but this requires a lot research and effort. The cost of adding a second key is around a hundred dollars and it also requires the programming of the car's computer. Professionals can do this however, it's a costly option.

Replacement Ignition

The current SAAB 9-3 uses an advanced alarm system based on a key code. If you lose your primary key, it can be costly to get another one since the car must have a special computer added and be programmed to accept a new key. Dealers can charge hundreds of dollars to program the new key when they are not able to do it.

If you've lost only one working key, a dealer will repair the computer in your car (known as the CIM or saab 9-3 replacement key TWICE) to create the replacement, and will charge you a premium price for it. We can reprogram the current EEPROM in your car computer to be prepared for a new key. This will save you more than 50% off the cost you have to pay a dealer.

If you've owned a saab car keys 9-3 a long time you are aware that the ignition keys are not very durable. If your ignition key isn't functioning properly, you must look into replacing it. They can become sticky and the buttons have been known to fall off. It's not as difficult as you think to replace the ignition key. With the proper tools, it can be accomplished in a short time.