• 목록
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Replacement Door Handles

As time passes the handles on your doors will get worn out and will require replacement. It is important to match the dimensions of the handles that were previously used when replacing them.

The top screw position as well as the lever and keyhole sizes are the three measurements you need to determine. Use the size guide to assistance with this.

Inline Lever/Lever

A lever/lever handle is a modern door handle designed to suit new or replacement doors. This style of door handle is available in a wide range of designs and finishes. A number of manufacturers make this type of handle, including Avocet ERA, Fullex, Hoppe, Mila, Millenco & Yale.

Fab and Fix Windsor Inline Sprung Lever Door Handle

The door handles of uPVC/Composite are made of sturdy materials and are suitable for doors with multi-point locks that require a strong design. The handles are inline and work from the same spindle and screw fixings so they are easily installed on doors made of uPVC/Composite, either new or old upvc door handles.

The handle can be placed and angled to accommodate the needs of all users. The handle has been tested for endurance up to 200,000 cycles. This helps ensure that the finish is of high quality and performance over time. The sprung lever is also adjustable to accommodate a wide range of locks. This is useful for doors with narrower openings where the cylinder is situated further back from the door. A lever that is shorter can be used on doors that have a latch that can be activated with the thumb on the inside.

Lever Pad

A Lever Pad upvc door handle operates differently to the lever type handles found on most doors. These handle types can either use a single spindle (inline) or independently from each side by using two offset spindles or inline (pad). They are usually employed on UPVC double glazed doors and are available in a variety of variations and styles.

The handles are available in a variety of finishes, including White Chrome and Gold. The finish meets BS EN 1670:2007 Grade 5 and is also resistant to corrosion, thereby giving the handle a high degree of durability and performance for the intended use.

All of the UPVC lever pad designs come with the spindle and screws which allow them to be put on a new or existing uPVC door. The 211mm backplate fixing centres permit a bigger size of handle which can often be a benefit when replacing window handles a faulty or worn multi-point door lock mechanism. The levers for these handles have a spring, which solves the issue of door handles that sag out of their horizontal position when not being used.

It is essential to match the PZ dimensions for both the multipoint lock and the uPVC doors when selecting the replacement UPVC spindle and handle. This measurement can also be referred to as 'handle centres or cylinder centre'. It is important for matching the correct handles.

When you have the right PZ size, you'll be required to make sure that the handle lever pads and push pads are a appropriate shape to accommodate the American with Disabilities Act (ADA) approved handles you require for your doors. These are usually round or square, with an internal lever and an external push pad.

Most of the UPVC lever pads that we offer are sprung, which means that they return to their horizontal position when they are not being used, instead of hanging out and possibly securing in the frame. This prevents drafts and cold air from entering a home. You will also find that the majority of UPVC lever pad handles are swivel, allowing you to install them on either side of the door.

Euro Cylinder

Cylinder locks are found on uPVC and other types of doors. The cylinder lock operates by using a key that unlocks the cylinder's casing. The case is then able to reveal pins that can be aligned with those inside the lock and allow them to rotate the camera that rotates, opening the door. Euro cylinders can be fitted with up to six pins with internal and external doors generally needing different levels of security.

Choosing the right cylinder is essential; it depends on how your doors and handles are utilized. For example, external doors require a more secure cylinder while doors inside can be secured using the standard cylinder. Additionally, certain cylinders come with additional features that can improve security even more, like anti-drill or anti-bump features.

A euro cylinder should be measured accurately to ensure it is the correct size for your door. The cylinder should be measured from the central screw hole to the ends of the cylinder. This includes the thumb turn in the event that one is present. If you are unable measure it with the lock in position, you can take it out of it. A cylinder that is protruding beyond the handle and escutcheon could be vulnerable to attacks such as snapping locks, so it is essential that it is not too long.

The majority of modern cylinders have been made with anti-drill and bump resistance features that are built into their design. They are designed to minimize attacks by forcing cylinders to turn in a new direction. This will help to deflect the attack and ensure your doors are secure.

There are cylinders that are designed to resist snapping. This is a common attack on cylinders. A specially designed tool is used to break the break line of the lock, and then the front of the cylinder is snapped off. This is a lot faster and easier to achieve than gaining access through multipoint locks. It also leaves little evidence of a break-in, which could hinder the insurance claim.

Spring Cassette

The spring cassette is located within the base of your door handle's backplate, supplying a spring-loaded solution and returning the multipoint lock handles back to their original position after use. The handles had no spring, and would slide when the locking mechanism was disengaged. This simple part is the best way to solve this issue. It also stops your upvc door from becoming stuck in either the open or closed position, as they aren't easy to close manually.

These spring cassettes were designed to be used with sprung multipoint locks. They will not fit unsprung handles and you'll have to cut a hole in your backplate in order for them to fit. (Please check the image for a technical diagram). These cassettes can be used as a replacement to damaged or missing cassettes that are in the backplate of uPVC door handles. They are fitted with an elongated square that accommodates an 8mm spindle and are available in a variety of.

These spring cassettes are an excellent value solution to the problem of sagging door handles. They are easy to fit and will increase the life span of your uPVC doors. For more information about our selection of uPVC spares and accessories please feel free to get in contact with our team. We are available to assist you and offer expert advice.